MC Stone collection thermo-adhesive RHINESTONES 1440pcs SS10 3mm Peridot light green
Regular price €23,00MC Stone Collection
1440 STRASS MC SS10 3mm
Hotfix thermoadhesives
PERIDOT color - LIGHT GREEN
* * MC QUALITY * *
INSTRUCTIONS FOR ATTACHING THERMO-ADHESIVE MATERIALS
Any thermoadhesive material can be applied in 4
different ways depending on the surface you want it on
attack,
the size of the material and the number of pieces you want attack.
The four modes are:
1) RHINESTONES APPLICATOR
2) A FLAME
3) GLUE
4) IRON
1) THE APPLICATOR FOR RHINESTONES and STUDS: allows very precise processing being able to attach rhinestones or studs
in “difficult” positions or even objects that it is not possible to lay out shoes, jeans pockets, wedding favors on a flat surface...
You choose tip a
depending on the size of the material you want to apply, you wait 3
minutes
so that the applicator warms up, all you have to do is position it
the rhinestone or the stud, it leans
the tip of the applicator over the material
for 20 seconds thus heating the glue
which is located under the rhinestone, remove the tip and wait for the material to cool
for some second, at that point it is attached.
2) ONE FLAME which can be from a candle, a camping stove….
It can be used for any stud or rhinestone.
It works in this
method: take the material (rhinestones or studs) with tweezers and heat it
the glue
that is behind the rhinestone, placing the material on the flame for a few seconds,
then as soon as it dissolved yes
apply the material to the surface you want to stick to, at that point
wait for it to cool
a few seconds and the rhinestone or stud is there attached.
2)
3) THE GLUE: it is necessary to use "soft" glues such as Gutermann ht2 or glue
Attak flex gel
(“glassy” glues like normal Attak do not resist
long). Glue can be used for any material
but it is
mandatory when studs or rhinestones are applied
plastic, wood, ceramic, glass….
Non-porous surface where the glue of the rhinestones or studs cannot penetrate and cannot "grip".
4) THE IRON: it is used to speed up times when necessary
attack many
rhinestones or lots of nearby studs; in this case the rhinestones are positioned
on the surface where you want to apply them, you put them
above the iron
iron for 20 seconds. The operation is repeated if it is not possible to heat up
all rhinestones at once;
to at this point everything is left to cool for a few minutes and the materials are attached.
In this case though
there is a risk that once the iron is placed on the surface
you could move the materials or you could ruin the fabric because a
part of the iron comes into contact
with the surface on which you want them apply thermoadhesive materials; to overcome this problem
we recommend
use the RHINESTONE PAPER which is used to hold the rhinestones in place
And protect the surfaces on which the materials are to be applied.
SHIPPING FEES:
At the final time before payment, you have to pay the shipping highest among the various items for the first item + €0.10 per
every object that comes purchased in addition to the first up to a maximum of €8.00 with which you can purchase any quantity of items.
(example: if you purchase 3 items and choose the registered mail, you pay €5.50 for registered mail or €6.30 for shipping shipping with
express courier for the first item and €0.10 for each additional item to the first one therefore for 3 items you will pay 5.70 with the post or €6.50 with the courier)
If this should not be the case, because sometimes there is still some problem, make the purchase calmly but before proceeding
upon payment, send us an email and we we will adjust the charges so that you pay the right price shipping
the photos contained in this site are of our production and therefore our exclusive property
and therefore they are protected by the provisions on copyright law 633/41; presidential decree 19/79; Legislative Decree 154/97