THERMO-ADHESIVE RHINESTONES 1000pcs SS16 4mm Smoked Topaz Brown hotfix stickers

1000 STRASS SS16 4mm
thermoadhesive hotfixes


Color SMOKED TOPAZ - BROWN


* * Korea Quality: First Choice * *




* * First Korean Quality * *

INSTRUCTIONS FOR ATTACHING THERMO-ADHESIVE MATERIALS

Any thermoadhesive material can be applied in 4 different ways depending on the surface you want it on attack,

the size of the material and the number of pieces you want attack.

The four modes are:

1) RHINESTONES APPLICATOR

2) A FLAME

3) GLUE

4) IRON

1) THE APPLICATOR FOR RHINESTONES and STUDS: allows very precise processing being able to attach rhinestones or studs

in “difficult” positions or even objects that it is not possible to lay out shoes, jeans pockets, wedding favors on a flat surface...

You choose tip a depending on the size of the material you want to apply, you wait 3 minutes

so that the applicator warms up, all you have to do is position it the rhinestone or the stud, it leans

the tip of the applicator over the material for 20 seconds thus heating the glue

which is located under the rhinestone, remove the tip and wait for the material to cool

for some second, at that point it is attached.

2) ONE FLAME which can be from a candle, a camping stove….

It can be used for any stud or rhinestone.

It works in this method: take the material (rhinestones or studs) with tweezers and heat it the glue

that is behind the rhinestone, placing the material on the flame for a few seconds,

then as soon as it dissolved yes apply the material to the surface you want to stick to, at that point wait for it to cool

a few seconds and the rhinestone or stud is there attached.

2)

3) THE GLUE: it is necessary to use "soft" glues such as Gutermann ht2 or glue Attak flex gel

(“glassy” glues like normal Attak do not resist long). Glue can be used for any material

but it is mandatory when studs or rhinestones are applied plastic, wood, ceramic, glass….

Non-porous surface where the glue of the rhinestones or studs cannot penetrate and cannot "grip".

4) THE IRON: it is used to speed up times when necessary attack many

rhinestones or lots of nearby studs; in this case the rhinestones are positioned on the surface where you want to apply them, you put them

above the iron iron for 20 seconds. The operation is repeated if it is not possible to heat up all rhinestones at once;

to at this point everything is left to cool for a few minutes and the materials are attached.

In this case though there is a risk that once the iron is placed on the surface

you could move the materials or you could ruin the fabric because a part of the iron comes into contact

with the surface on which you want them apply thermoadhesive materials; to overcome this problem

we recommend use the RHINESTONE PAPER which is used to hold the rhinestones in place

And protect the surfaces on which the materials are to be applied.

SHIPPING FEES:

At the final time before payment, you have to pay the shipping highest among the various items for the first item + €0.10 per

every object that comes purchased in addition to the first up to a maximum of €8.00 with which you can purchase any quantity of items.

(example: if you purchase 3 items and choose the registered mail, you pay €5.60 for registered mail or €6.60 for shipping shipping with

express courier for the first item and €0.10 for each additional item to the first one therefore for 3 items you will pay 5.80 by post or €6.80 by courier)

If this should not be the case, because sometimes there is still some problem, make the purchase calmly but before proceeding

upon payment, send us an email and we we will adjust the charges so that you pay the right price shipping

the photos contained in this site are our production and therefore our exclusive properties and therefore
are protected by copyright law 633/41; presidential decree 19/79; Legislative Decree 154/97