![STRASS MC Stone collection 1440pcs SS16 4mm ORANGE hotfix thermoadhesive](http://giorgettistrass.com/cdn/shop/products/601c55a5c401b__57_{width}x.jpg?v=1612477395)
STRASS MC Stone collection 1440pcs SS16 4mm ORANGE hotfix thermoadhesive
Regular price €26,00/
Tax included.
Shipping calculated at checkout.
MC Stone Collection
1440 STRASS MC SS16 4mm
Hotfix thermoadhesives
ORANGE color - HYACINTH
INSTRUCTIONS FOR ATTACHING THERMO-ADHESIVE MATERIALS
Any thermoadhesive material can be applied in 4 different ways depending on the surface you want to attach it to,
the size of the material and the number of pieces you want to attach.
The four modes are:
1) RHINESTONES APPLICATOR
2) A FLAME
3) GLUE
4) IRON
1) THE APPLICATOR FOR RHINESTONES and STUDS: allows very precise processing
being able to attach rhinestones or studs in "difficult" positions or even objects that
it is not possible to lay out shoes, jeans pockets, wedding favors on a flat surface...
You choose the tip depending on the size of the material you want
apply, you wait 3 minutes for the applicator to heat up then you don't
other than positioning the rhinestone or stud, you rest the tip of the applicator
above the material for 20 seconds, thus heating the glue
finds the rhinestone underneath, removes the tip and waits for the material to cool
for a few seconds, at which point it is attacked.
2) A FLAME which could be from a candle, from a camping stove….
Can be used for any stud or rhinestone. It works like this:
take the material (rhinestones or studs) with tweezers and heat the glue
that is behind the rhinestone, placing the material on the flame for a few
second, then as soon as it is melted, apply the material to the surface on which it is applied
it wants to attack, at which point it waits for it to cool down
a few seconds and the rhinestone or stud is attached.
3) THE GLUE: it is necessary to use "soft" glues such as Gutermann ht2 glue
o Attak flex gel (“glassy” glues like normal Attak do not last long).
Glue can be used for any material but is mandatory
when applying studs or rhinestones to plastic, wood,
ceramic, glass…. Non-porous surface where the glue of the rhinestone or the
stud cannot penetrate and cannot "grip".
4) THE IRON: it is used to speed up times when necessary
attach lots of rhinestones or lots of studs nearby; in this case yes
they place the rhinestones on the surface where you want to apply them, you put them on
over the iron for 20 seconds. The operation is repeated if it is not successful
to heat all the rhinestones at once; at this point we leave
cool everything for a few minutes and the materials are attached.
In this case, however, there is the risk that once the iron is placed
ironing over the surface could move the materials or it could
ruin the fabric because part of the iron comes into contact
with the surface on which you want to apply the thermoadhesive materials;
to overcome this problem we recommend using PAPER for
STRASS which is used to hold the rhinestones in place
and protect the surfaces on which the materials are applied.
SHIPPING FEES:
At the final time before payment, you have to pay a shipping
for the first item + €0.10 for each item purchased
in addition to the first (example: if you purchase 3 items and the cost of
shipping for the first item is €6.90 you will pay €7.10)
the photos contained in this site are of our production and therefore of
our exclusive property and are therefore protected by the regulations on
copyright law 633/41; presidential decree 19/79; Legislative Decree 154/97