Stud flat studs Black rectangle 80pcs hotfix 3mmx 10mm Thermoadhesive
Regular price €2,40 80 FLAT RECTANGLE STUDS
3mm x 10mm
Black colour
HOTFIX IRON-ON ADHESIVES
* * Korea Quality: First Choice * *
INSTRUCTIONS FOR APPLYING THE STUDS
These studs can be applied in 4 different ways:
1) THE APPLICATOR FOR RHINESTONES AND STUDS: allows very precise processing by being able to attach rhinestones or studs
in "difficult" positions or even objects that cannot be laid out on a flat surface, shoes, jeans pockets, wedding favors...
You choose the tip depending on the size of the material you want to apply, wait 3 minutes
so that the applicator heats up, all you have to do is position the rhinestone or stud and place it on it
the tip of the applicator over the material for 20 seconds, thus heating the glue
which is located under the rhinestone, remove the tip and wait for the material to cool
for a few seconds, at which point it is attacked.
2) A FLAME which could be from a candle, from a camping stove….
Can be used for any stud or rhinestone.
It works like this: you take the material (rhinestones or studs) with tweezers and heat the glue
that is behind the rhinestone, placing the material on the flame for a few seconds,
then as soon as it has melted, apply the material to the surface on which you want to stick, at which point you wait for it to cool
a few seconds and the rhinestone or stud is attached.
3) THE GLUE: it is necessary to use "soft" glues such as Gutermann ht2 glue or Attak flex gel
(“glassy” glues like normal Attak don't last long). Glue can be used for any material
but it is mandatory when studs or rhinestones are applied to plastic, wood, ceramic, glass...
Non-porous surfaces where the glue from the rhinestone or stud cannot penetrate and cannot "grip".
4) THE IRON: it is used to speed up times when you have to attack a lot
rhinestones or lots of nearby studs; in this case you place the rhinestones on the surface where you want to apply them, you put them on
over the iron for 20 seconds. The operation is repeated if it is not possible to heat all the rhinestones at once;
at this point everything is left to cool for a few minutes and the materials are attached.
In this case, however, there is a risk that once the iron is placed on the surface
the materials could move or the fabric could be ruined because part of the iron comes into contact
with the surface on which you want to apply the thermoadhesive materials; to overcome this problem
we recommend using PAPER for RHINESTONES and Studs which is used to hold the rhinestones in place
and protect the surfaces on which the materials are applied.
SHIPPING FEES:
at the final moment before payment, you must pay the highest shipping among the various items for the first item + €0.10 for
each item that is purchased in addition to the first up to a maximum of €8.00 with which you can purchase any quantity of items.
(example: if you purchase 3 items and you choose registered mail, you pay €5.50 for registered shipping or €6.30 for registered shipping
express courier for the first item and €0.10 for each additional item to the first, so for 3 items you will pay €5.70 by post or €6.50 by courier)
If this is not the case, because sometimes there are still some problems, calmly make the purchase but before proceeding
upon payment, send us an email and we will adjust the charges so that you pay the right shipping price
the photos contained in this site are of our production and therefore our exclusive property and therefore
are protected by copyright law 633/41; presidential decree 19/79; Legislative Decree 154/97
