SWAROVSKI thermoadhesive rhinestones Light peach peach hotfix

€25,30
/
Tax included. Shipping calculated at checkout.
Size
Only 2 items in stock!



THERMO-ADHESIVE SWAROVSKI RHINESTONES

  • 1440 STRASS SS10 (2.70-2.90mm) 2038 XILION ROSE
  • 1440 STRASS SS16 (3.8-4.00mm) 2028 XILION ROSE
  • 144 STRASS SS34 (7.1-7.3mm) 2028 XILION ROSE


HOTFIX IRON-ON ADHESIVES



Light peach color

INSTRUCTIONS FOR ATTACHING THERMO-ADHESIVE MATERIALS

Any thermoadhesive material can be applied in 4 ways

different depending on the surface on which you want to attach it,

the size of the material and the number of pieces you want to attach.

The four modes are:

1) RHINESTONES APPLICATOR

2) A FLAME

3) GLUE

4) IRON

1) THE APPLICATOR FOR RHINESTONES and STUDS: allows for a lot of work

precise, being able to attach rhinestones or studs in "difficult" positions or even objects

that it is not possible to lay out shoes, jeans pockets, wedding favors on a flat surface...

You choose the tip depending on the size of the material you want

apply, you wait 3 minutes for the applicator to heat up then you don't

other than positioning the rhinestone or stud, you rest the tip of the applicator

above the material for 20 seconds, thus heating the glue that is found

under the rhinestone, you remove the tip and wait for the material to cool

for a few seconds, at which point it is attacked.

2) A FLAME which could be from a candle, from a camping stove….

Can be used for any stud or rhinestone. It works in this

method: take the material (rhinestones or studs) with tweezers and heat it

the glue behind the rhinestone, placing the material on the flame

for a few seconds, then as soon as it has melted, apply the material on

surface on which you want to stick, at which point you wait for it to cool

a few seconds and the rhinestone and the stud are attached.

3) THE GLUE: it is necessary to use "soft" glues such as Gutermann ht2 glue

o Attak flex gel (“glassy” glues like normal Attak do not last long).

Glue can be used for any material but is mandatory in

moment in which studs or rhinestones are to be applied to plastic, wood,

ceramic, glass…. Non-porous surface where the glue of the rhinestone or the

stud cannot penetrate and cannot "grip".

4) THE IRON: it is used to speed up times when necessary

attach lots of rhinestones or lots of studs nearby; in this case yes

place the rhinestones on the surface where you want to apply them, you

puts it on the iron for 20 seconds. The operation is repeated if not

you can heat all the rhinestones at once; at this point yes

let everything cool for a few minutes and the materials are attached.

In this case, however, there is the risk that once the iron is placed

ironing over the surface could move the materials or it could

ruin the fabric because part of the iron comes into contact

with the surface on which you want to apply the thermoadhesive materials;

to overcome this problem we recommend using PAPER for

STRASS which is used to hold the rhinestones in place and protect the surfaces

on which the materials are to be applied.



SHIPPING FEES:
At the final time before payment, you have to pay a shipping
for the first item + €0.10 for each item purchased
in addition to the first up to a maximum of €8.00 with which you can purchase
any quantity of objects. (example: if you purchase 3 items
€6.90 for shipping for the first item and €0.10 for each item
additional to the first one so for 3 items you will pay €7.10)


the photos contained in this site are of our production and therefore
our exclusive property and are therefore protected by law

on copyright law 633/41; presidential decree 19/79; Legislative Decree 154/97

GIORGETTI STRASS

YOUR NEEDS, OUR POINT OF REFERENCE

Quality and efficiency at the customer's service, all our professionalism given by over 50 years of presence in the area, to always offer you the best, from the products of the best brands to delivery times.

Back to SWAROVSKI